Bus and Truck Mechanics and Diesel Engine Specialists

As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, or veteran status.

Tired of just doing preventative maintenance or working only on engines? Are you ready to take the next step and work on equipment that requires a high level of skill - hydraulics, electrical, diagnostics - using modern maintenance practices and technologies? Are you looking for that right opportunity which will allow you to use and be rewarded for your skills and ability, and provide opportunity for growth? Our Mechanics are trained to provide superior maintenance on both diesel equipment and, at some locations, on our growing fleet of CNG trucks. We care about our Mechanic’s safety and show it by demanding solid safety practices of all our Mechanics and managers. Pride, safety, training, growth, opportunity, great benefits, rewards – check us out, we may be the company for you.

**I. Job Summary**

Under general supervision, performs preventive maintenance services and inspects, diagnoses and repairs vehicles and equipment.

**II. Essential Duties and Responsibilities**

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.

+ Works under limited supervision and selects from written instructions and established procedures to accomplish assigned tasks.

+ Performs repairs and assigned preventive maintenance services.

+ Performs inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment.

+ Utilizes vehicle computer electronics systems to interpret failure modes to initiate or assign repairs.

+ Estimates time and material costs on vehicle repairs and requisitions new parts.

+ Performs all work within Standard Repair Times (SRTs).

+ Performs service calls for emergency breakdowns.

+ Conducts safety checks on vehicles.

+ Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times.

+ Assists senior Mechanics in the completion of project work.

+ Reviews, completes or assigns repairs identified on Driver Vehicle Inspection Reports.

+ Maintains a clean, safe work area in compliance with Corporate / OSHA Standards, and performs all work in accordance with established safety procedures.

**III. Supervisory Responsibilities**

This job has no supervisory duties.

**IV. Qualifications**

The requirements listed below are representative of the qualifications necessary to perform the job.

A. Education and Experience

+ Education: Not required.

+ Experience: Two (2) years of relevant work experience.

B. Certificates, Licenses, Registrations or Other Requirements

+ Must be at least 18 years of age.

+ Legally eligible to work in the United States.

+ Ability to perform physical requirements of the position with or without reasonable accommodations.

+ Successfully complete and pass pre-employment drug screen and physical.

C. Other Knowledge, Skills or Abilities Required

+ None required.

**V. Work Environment**

Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.

+ Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc.) most of the work day;

+ Required to exert physical effort in handling objects less than __ pounds most of the work day;

+ Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc.) often;

+ Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements often;

Normal setting for this job is: repair/maintenance shop.

**Benefits**

At Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site.

If this sounds like the opportunity that you have been looking for, please click "Apply.”

Equal Opportunity Employer: Minority/Female/Disability/Veteran

**What’s the Job?**

Ready to move your career forward? As an experienced Technician at Penske, you’ll do exactly that. Here, you’ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road.

As a Technician I at Penske, you are a respected, experienced lead at your location—a master technician. You set an example and informally mentor others while learning from your manager. You are trusted to work independently while doing major and minor repairs, performing road tests to diagnose problems and completing maintenance tasks.

Why is this job awesome? For starters, your skills and experience are recognized. You’ll get to work on lots of different types of equipment—not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities.

Yes, we know you are experienced, and we will rely on your experience and leadership. But we’ll also teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are continuing to get the training you need to advance in your career. You’ll be inspired and encouraged by the best in the industry. We take pride in how clean our facilities are, and we provide you with all the necessary major shop tools.

If you are an experienced truck and trailer technician and are interested in a stable career with a lot of opportunity for growth, join our team.

**This position will be located at 1510 Chester Pike in Eddystone, PA.**

**Main Responsibilities:**

• Making sure vehicles are maintained and safe for our customers

• Doing preventive maintenance services on truck and trailer equipment with little or no supervision and in a timely manner

• Repairing and troubleshooting major components such as engines, transmissions and differentials, including replacing complete assemblies, turbochargers, fuel system components, etc.

• Keeping your work area clean and safe

• Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics

• Learning new skills through Penske’s technician training

• Working on other projects and tasks as assigned by supervisor

**Why Penske is for You:**

• Competitive starting salary

• Shift Premium

• Career stability

• Opportunity for growth

• Excellent benefits, including lots of time off

• Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider)

• Advanced vehicle maintenance technology

• Location and schedule flexibility

**Qualifications:**

• 6 years of practical experience with truck and tractor-trailer maintenance

• High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred

• Specialized training and experience in the diagnosis/troubleshooting of major components (engines, transmissions, differentials), OEM training courses, ASE Certification, and 608/609 certifications (preferred)

• Experienced using all tools of the trade (including welding equipment, diagnostic equipment, and hand and power tools)

• Valid driver’s license required, CDL preferred

• The ability to solve problems

• Excellent customer service skills and communication skills

• The ability to work well as part of a team

• Willing to work in non-climate-controlled conditions

• Basic computer skills

• The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management

• The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice.

• Regular, predictable, full attendance is an essential function of the job

• As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review.

• Willingness to travel as necessary within the district (customers’ yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening

This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others.

**Physical Requirements:** The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period.

• The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls.

• The associate must be able to work safely at heights using applicable ladders and elevated working platforms.

• The associate must be able to safely work in all weather conditions.

• Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment.

• The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg.

Penske is an Equal Opportunity Employer

Keywords:

Automotive, Diesel, Diesel Repair, Diesel Tech, Diesel Mechanic, Gas Mechanic, Mechanic, Hydraulics Auto Repair, Truck Repair, Trailer Repair, Equipment Installer, Electronic Diagnostic, Car Carrier Repair, Mechanical Repair, Installer, Truck Equipment, Auto Mechanic, ASE Certified, ASE, Automotive, Repair, Light And Heavy Duty Trucks, Truck Mechanic Service Technician, Heavy Truck & Equipment Technician, Heavy Truck Mechanic, Equipment Mechanic, Shop Mechanic, Truck Mechanic, Fleet Mechanic, Fleet Technician, Trailer Mechanic, Universal Technical Institute, UTI, Wyotech, Lincoln College of Technology, Lincoln Tech, University of Northwest Ohio, Detroit Diesel, Cummins

**About Penske Truck Leasing/Transportation Solutions**

Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more.

Job Category: Vehicle Maintenance/Mechanics/Technicians

Job Function: Truck Maintenance

Job Family: Vehicle Maintenance

Address: 1510 Chester Pike C/O PECO Baldwin Service Building

Primary Location: US-PA-Eddystone

Employer: Penske Truck Leasing Co., L.P.

Req ID: 2501584

Fleet Mechanic

Position: Fleet Mechanic

Parking Lot Painting Company (PLP Co.) has built a reputation for being a premier specialty contractor involved in the installation and removal of pavement markings. Our customers look for us to provide a quality product and produce our product in a timely manner.

Job Summary:

We are seeking a skilled and reliable Fleet Mechanic to join our team. The ideal candidate will have a strong background in repair and maintenance, with the ability to diagnose and fix a variety of vehicle & equipment issues. This role requires excellent problem-solving skills and the ability to work independently.

Job Responsibilities:

+ Diagnostics and Repairs: Perform diagnostics, repairs, and routine maintenance on vehicles and equipment. Repairs and maintains construction equipment of various types and sizes from light-duty to heavy-duty (class 8) trucks and from light-duty to heavy duty operating equipment.

+ Emergency Assistance: If needed provide roadside assistance for vehicles that have broken down, including repairs and towing coordination if necessary.

+ Vehicle & System Maintenance: Perform preventative maintenance following OEM specifications as well as electrical, hydraulic, and pneumatic diagrams. Remove and replace defective parts by dismantling devices using hand and power tools.

+ Tool and Equipment Maintenance: Ensure all tools and equipment are in good working condition and properly maintained.

+ Test repaired equipment to ensure proper functioning when used.

+ Occasionally fabricate, weld and cut parts, using arc-welding/ wire feed and flame cutting equipment.

+ Safety Compliance: Adhere to all safety protocols and guidelines to ensure a safe working environment.

+ Perform DOT inspections.

+ Perform related and other duties as requested.

Skills and Qualifications:

+ Technical Expertise: Proven experience as a mechanic.

+ Diagnostic Skills: Strong ability to diagnose and repair a wide range of mechanical issues with vehicles and equipment.

+ Physical Stamina: Ability to perform physical tasks, including lifting heavy equipment and working in various weather conditions.

+ Problem-Solving: Strong problem-solving skills and attention to detail.

+ High School Diploma of GED

+ Welding and fabrication experience preferred not required.

+ Must have a valid driver’s license, a CDL license is preferred.

+ Must have a good driving record with no major violations within the last 5 years or be accepted by the company insurance policy provider to drive PLP company vehicles.

Position Requirements:

+ Must comply with PLP Company Substance Abuse Policy and DOT Drug Control Program, which includes pre-employment and random drug and/or alcohol testing.

+ Must have experience with diesel engines, gas engines and hydraulics.

+ Must have a manual-hand-finger dexterity.

+ Must have eye-hand-foot coordination.

+ Must be able to lift and/or transport +50 pounds.

+ Must be willing to workdays, nights, weekends, and occasional travel.

+ 10hr+ workdays / 40hr+ work weeks

+ Exhibit teamwork.

Key Competencies:

+ Honest, trustworthy, dependable.

+ PUNCTUAL. Must arrive at work by the designated start time.

+ Self-disciplined.

+ Strong work ethic.

+ Desire to learn and be trained.

+ Ability to learn through on-the-job training.

+ Be a team player. Cooperate with co-workers.

+ Polite to customers, contractors, and the traveling public.

+ Be safe! Must adhere to safety requirements and procedures.

+ Think quickly and act appropriately in emergency situations.

+ Ability to work diligently while under time restraints.

+ Willing to accept change based on business needs.

Benefits:

+ Competitive salary and benefits package.

+ Opportunities for professional development and advancement.

+ CDL Training, on-the-job.

+ Hours, overtime.

+ Variety of work.

+ Supportive and dynamic work environment.

The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities, as needed.

Parking Lot Painting Company (PLP Co.) is an equal Opportunity Employer.

Powered by JazzHR

**What’s the Job?**

Ready to move your career forward? As an experienced Technician at Penske, you’ll do exactly that. Here, you’ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road.

As a Technician I at Penske, you are a respected, experienced lead at your location—a master technician. You set an example and informally mentor others while learning from your manager. You are trusted to work independently while doing major and minor repairs, performing road tests to diagnose problems and completing maintenance tasks.

Why is this job awesome? For starters, your skills and experience are recognized. You’ll get to work on lots of different types of equipment—not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities.

Yes, we know you are experienced, and we will rely on your experience and leadership. But we’ll also teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are continuing to get the training you need to advance in your career. You’ll be inspired and encouraged by the best in the industry. We take pride in how clean our facilities are, and we provide you with all the necessary major shop tools.

If you are an experienced truck and trailer technician and are interested in a stable career with a lot of opportunity for growth, join our team.

**This position will be located at the Penske facility at 6800 Essington Avenue in Philadelphia, PA.**

**Main Responsibilities:**

• Making sure vehicles are maintained and safe for our customers

• Doing preventive maintenance services on truck and trailer equipment with little or no supervision and in a timely manner

• Repairing and troubleshooting major components such as engines, transmissions and differentials, including replacing complete assemblies, turbochargers, fuel system components, etc.

• Keeping your work area clean and safe

• Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics

• Learning new skills through Penske’s technician training

• Working on other projects and tasks as assigned by supervisor

**Why Penske is for You:**

• Competitive starting salary

• Shift Premium

• Career stability

• Opportunity for growth

• Excellent benefits, including lots of time off

• Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider)

• Advanced vehicle maintenance technology

• Location and schedule flexibility

**Qualifications:**

• 6 years of practical experience with truck and tractor-trailer maintenance

• High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred

• Specialized training and experience in the diagnosis/troubleshooting of major components (engines, transmissions, differentials), OEM training courses, ASE Certification, and 608/609 certifications (preferred)

• Experienced using all tools of the trade (including welding equipment, diagnostic equipment, and hand and power tools)

• Valid driver’s license required, CDL preferred

• The ability to solve problems

• Excellent customer service skills and communication skills

• The ability to work well as part of a team

• Willing to work in non-climate-controlled conditions

• Basic computer skills

• The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management

• The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice.

• Regular, predictable, full attendance is an essential function of the job

• As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review.

• Willingness to travel as necessary within the district (customers’ yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening

This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others.

**Physical Requirements:** The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period.

• The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls.

• The associate must be able to work safely at heights using applicable ladders and elevated working platforms.

• The associate must be able to safely work in all weather conditions.

• Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment.

• The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg.

Penske is an Equal Opportunity Employer

Keywords:

Automotive, Diesel, Diesel Repair, Diesel Tech, Diesel Mechanic, Gas Mechanic, Mechanic, Hydraulics Auto Repair, Truck Repair, Trailer Repair, Equipment Installer, Electronic Diagnostic, Car Carrier Repair, Mechanical Repair, Installer, Truck Equipment, Auto Mechanic, ASE Certified, ASE, Automotive, Repair, Light And Heavy Duty Trucks, Truck Mechanic Service Technician, Heavy Truck & Equipment Technician, Heavy Truck Mechanic, Equipment Mechanic, Shop Mechanic, Truck Mechanic, Fleet Mechanic, Fleet Technician, Trailer Mechanic, Universal Technical Institute, UTI, Wyotech, Lincoln College of Technology, Lincoln Tech, University of Northwest Ohio, Detroit Diesel, Cummins

**About Penske Truck Leasing/Transportation Solutions**

Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more.

Job Category: Vehicle Maintenance/Mechanics/Technicians

Job Function: Truck Maintenance

Job Family: Vehicle Maintenance

Address: 6800 Essington Ave

Primary Location: US-PA-Philadelphia

Employer: Penske Truck Leasing Co., L.P.

Req ID: 2501624

First for a reason:

**At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer.**

**First Student is now hiring a Shop Foreman – Lead Diesel Mechanic for our shop serving Methacton School District! Now offering $5000 Sign on Bonus!**

**First things First: Who are we?**

Twice the size of our next largest competitor, **First Student** is the leading school transportation solutions provider in North America. Every day, we complete 5 million student journeys, moving more passengers than all U.S. airlines combined. With a team of highly trained drivers and the industry’s strongest safety record, First Student delivers reliable, quality services to 1,100 school districts.

**Why join First as a Shop Foreman / Lead Diesel Mechanic?**

+ $ **38.50** per hour based on experience and qualifications (NOT flat rate)

+ $5000 Sign on bonus (Expires 2/28/25 ; Conditions Apply)

+ An additional $.25 per hour for each ASE certification you possess or obtain

+ Company-paid ASE testing and training materials

+ Monday-Friday full-time shift schedule and consistent, year-round work

+ Tremendous career advancement opportunities

+ Benefits including medical, dental, vision, & 401(k)

+ Paid holidays & vacation

+ Annual allowances for boots and prescription safety glasses

+ State-of-the-art training programs

+ Discounts on cell phone plans, cars, and more through the Perk Spot program!

**About the Shop Foreman / Lead Diesel Mechanic Position**

As a Lead Fleet Technician / Shop Foreman at First Student, you’ll schedule and perform school bus fleet maintenance, diagnose and troubleshoot complex problems, and maintain service records. Other job duties will include:

+ Supervise technicians in the shop.

+ Generate work orders and track progress through completion.

+ Maintain advanced knowledge of all vehicle components to effectively diagnose and perform maintenance and repairs.

+ Monitor shop operational performance and efficiency and take action to improve as needed.

**Lead Fleet Technician / Shop Foreman Qualifications**

+ Valid driver’s license required; Willingness to obtain CDL while employed – We train!

+ At least 5 years of automotive or diesel maintenance & repair experience or technical school education.

+ Previous experience in a lead technician, supervisor, or other management role is preferred.

+ Possess a mechanic’s tool set.

+ Willingness to participate in ASE certification program. Training, testing, and bonuses provided!

+ Subject to DOT drug as a safety-sensitive employee. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason.

**Get your career on the road with First Student!**

_In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis._

_All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia’s Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request_ _https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf_ _._

First for a reason:

**At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer.**

**First Student is hiring immediately for a Mechanic for our shop serving** **Norwin!**

**As a Technician at First Student, you will play an integral role in ensuring the safety of the children who count on us for a ride to and from school in those classic yellow buses.**

**Why join First as a Mechanic?**

In addition to a health benefits package, 401k with company matching, paid vacations, paid holidays, and tremendous growth opportunities, we are also proud to offer our technicians:

+ **$26.12** per hour, based on experience and qualifications (NOT flat-rate)

+ ASE incentive of $.25/hour for each relevant ASE obtained (we pay for the training materials and exams!)

+ Monday-Friday **8 AM - 5 PM** full-time shift

+ Annual allowances for boots and prescription safety glasses

+ State-of-the-art training programs

+ Discounts on cell phone plans, cars, and more through the Perk Spot program!

**About First Student’s Mechanic Position**

At First Student, our technicians perform maintenance to ensure our fleet of newer vehicles is safe for road travel. They also use their diagnostic skills to troubleshoot issues needing repair work. As a technician at First Student, your day will include the tasks mentioned above and the following:

+ Performing maintenance on brakes, suspensions, drivetrains, & transmissions

+ Completing work orders

+ Assisting with mobile emergency services

Mechanics and technicians are subject to DOT drug testing as a safety-sensitive employee. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason.

**You might be a fit for our Mechanic role if:**

+ You want to work in a position that meaningfully impacts your community

+ You have 3 of experience working with automotive, diesel, electric, or CNG vehicles

+ You have a valid driver’s license and a willingness to obtain a CDL (don’t worry, we will train you for this!)

+ You have a mechanic’s tool set

+ You want to grow, learn, and develop your skillset through ASE testing

**For our Mechanic roles, First Student encourages applications from candidates who:**

+ Do not have a college degree

+ Have military experience

+ Are returning to the workforce

+ Are looking for hourly (not flat-rate) jobs

**Get your career on the road with First Student!**

_In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis._

_All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia’s Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request_ _https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf_ _._

ARE YOU A CURRENT US FOODS EMPLOYEE? PLEASE APPLY DIRECTLY THROUGH OUR INTERNAL WORKDAY CAREER SITE (https://www.myworkday.com/usfoods/d/task/2998$47185.htmld)

Join Our Community of Food People!

Mechanic will be responsible for the troubleshooting, repair and maintenance of the Fleet road equipment including tractor, trailer, thermo-king, converter dolly and maintenance vehicles. Ensure compliance with all State and Federal trucking regulations. Mechanics will also be responsible for the documentation, completion, and to keep current the maintenance logs for all repairs and parts used daily.

**THIRD SHIFT POSITION**

**Ready to build a career with a company that’s leading the foodservice industry?**

**Join Our Community of Food People!**

**We help YOU make it!**

**Diesel Technicians starting at $31 per hour**

**​** **Annual Tool Allowance!**

**Benefits available on Day! Medical, dental, vision. We offer 401K, employee stock purchase plan and a store culture of safety! 2% automatic company contribution to 401(k) with company match up to additional 6%!**

Work Schedule:

Sunday - Thursday

11PM - 7:30AM

Starting Pay $26 per hour

Willing to Train with some relevant experience.

**Main Ingredients of the Job**

+ Troubleshoot, diagnose, rebuild, replace and complete all required repairs on .diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).

+ Perform preventative maintenance within company standards.

+ Complete documentation of all repair orders, PM list and parts accountability.

+ Handle road service calls; perform road rescue/transport equipment as needed.

+ Keep track of assigned repairs by logging in and out of the Shop Fax system.

+ Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.

+ Maintain inventory and proper recordkeeping.

+ Backup to other maintenance shop personnel.

+ Willingness and capacity to assume increased responsibility and certifications.

+ Performs other duties as assigned

Education/Training:

High school diploma or equivalent required.

**Related Experience/Requirements:**

+ A valid Class-A CDL license and DOT certified is **preferred.**

+ Must have (1) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (1) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.

+ Diagnostic and troubleshooting competency relating to equipment repairs.

+ Successfully demonstrated independent analytical and problem-solving skills.

+ Prior experience in administering appropriate PM program.

+ Must furnish own personal hand tools.

**Education/Training:**

High school diploma or equivalent required.

**Physical Requirements:**

JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & liftgates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently Type: 9. Twisting Occasionally

**Why Us Foods?**

Our Customers' Success Goes Far Beyond Great Food. At Us Foods, We Work to Exceed Expectations and Give Our Customers the Competitive Edge They Need. At the Foundation of Those Efforts Are Our Cultural Beliefs, The Pillars That Define Our Work Ethic, Collaborative Spirit and Commitment to Service.

At U **s Foods®** , We Are Committed to Compensation and Benefits That Respect and Reward Our Employees for Their Dedication and Hard Work. If You Join Our Team, We Provide Flexibility and Options to Fit Every Stage of Your Career.

*****EOE Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Protected Veteran/Disability Status*****

Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $25.00 - $28.00​

As applicable, this role will also receive overtime compensation, incentive compensation based on productivity and quality, shift differential. ​

​Benefits for this role may include health insurance, retirement benefits, paid time off, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html .

*****EOE** **Race/Color/Religion/Sex/Sexual** **Orientation/Gender Identity/National Origin/Protected Veteran/Disability Status*****

Puede ver este sitio de empleo y aplicación en español utilizando la configuración de su navegador o teléfono móvil. Haga clic a continuación para obtener más información.

Microsoft Edge (https://www.usfoods.com/content/dam/usf/pdf/Policies/HR/Microsoft\_Edge\_Spanish\_Instructions.pdf)

Google Chrome

Safari

iPhone

Androide (https://www.usfoods.com/content/dam/usf/pdf/Policies/HR/Android\_Spanish\_Instructions.pdf)

US Foods is one of America’s great food companies and a leading foodservice distributor, partnering with approximately 300,000 restaurants and foodservice operators to help their businesses succeed. With 28,000 employees and more than 70 locations, US Foods provides its customers with a broad and innovative food offering and a comprehensive suite of e-commerce, technology and business solutions. US Foods is headquartered in Rosemont, Ill., and generates more than $28 billion in annual revenue. Visit www.usfoods.com to learn more.

US Foods may collect personal information from you in connection with the application process. US Foods complies with the California Privacy Rights Act of 2020, and its policy may be found **here (https://www.usfoods.com/content/dam/usf/pdf/Policies/HR/USF\_CCPA\_policy.pdf) .**

US Foods, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other basis prohibited by applicable law.

EEO is the Law poster is available here (https://www.dol.gov/ofccp/regs/compliance/posters/pdf/eeopost.pdf) .

EEO is the Law poster supplement is available here (https://www.dol.gov/ofccp/regs/compliance/posters/pdf/OFCCP\_EEO\_Supplement\_Final\_JRF\_QA\_508c.pdf) .

Pay Transparency policy statement is available here (https://www.dol.gov/sites/dolgov/files/ofccp/pdf/pay-transp\_%20English\_formattedESQA508c.pdf) .

US Foods is committed to working with and providing reasonable accommodation to individuals with disabilities. If reasonable accommodation is needed to participate in the interview process or to perform essential job functions, please contact our US Foods Application Accommodation Line at 855-873-2468. You will be prompted to leave a message. Please state the specifics of the assistance needed and your contact information. A member of our HR department will return your call within two business days.

+ **Pay: $22.88 per hour based on experience**

+ **$600.00 Annual Boot and Tool allowance**

+ **Outstanding benefits -** www.syscobenefits.com (http://www.benefitssysco.com/)

+ **Excellent full time career with a stable and growing company**

+ **_Move your Career FORWARD with SYSCO FOODS!_**

**JOB SUMMARY**

To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road,

reduce vehicle downtime and improve total fleet reliability.

**RESPONSIBILITIES**

+ Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet.

+ Learn to perform FAI/CVI (Annual) (First Article Inspection - Commercial Vehicle Inspection) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment under the guidance

+ of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies).

+ Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles,

+ and any other company-owned equipment.

+ Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty

+ vehicles, and any company-owned equipment.

+ Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or managers such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality

+ manner.

+ Address all driver vehicle inspection report write-ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager.

+ Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems

+ (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager.

+ Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager.

+ Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager

**QUALIFICATIONS**

**Education**

+ Medium/Heavy Duty truck technical training 2-year school (preferred)

+ l High school diploma or equivalent required

**Experience**

+ No experience required

+ Current and valid driver's license (CDL Preferred)​

**Professional Skills**

+ Basic knowledge and skill of all vehicle systems and components

+ Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment

+ Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG)

+ Basic computer skills and knowledge

**Qualifications**

+ Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics.

+ Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development

+ Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required)

+ Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required)

+ ASE certifications – Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required)

+ 609 HVAC Certification (Preferred, Not Required)

+ Working knowledge of computer-based diagnostic software for OEM’s and component manufacturers

+ Apprentice will be required to complete Sysco SIU training modules for safety and other required courses.

**Physical Demands**

+ While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear.

+ The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl.

+ The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs.

+ The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment.

+ Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus

**Working Conditions**

+ While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces.

+ The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call.

+ The associate may occasionally be required to travel to other operating companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.).

+ The associate is occasionally exposed to high, precarious places and confined spaces.

+ The associate is occasionally exposed to fumes or airborne particles.

+ The noise level in the work environment is usually moderate.

AFFIRMATIVE ACTION STATEMENT:

Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

**What’s the Job?**

Ready to move your career forward? As an experienced Technician at Penske, you’ll do exactly that. Here, you’ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road.

As a Technician I at Penske, you are a respected, experienced lead at your location—a master technician. You set an example and informally mentor others while learning from your manager. You are trusted to work independently while doing major and minor repairs, performing road tests to diagnose problems and completing maintenance tasks.

Why is this job awesome? For starters, your skills and experience are recognized. You’ll get to work on lots of different types of equipment—not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities.

Yes, we know you are experienced, and we will rely on your experience and leadership. But we’ll also teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are continuing to get the training you need to advance in your career. You’ll be inspired and encouraged by the best in the industry. We take pride in how clean our facilities are, and we provide you with all the necessary major shop tools.

If you are an experienced truck and trailer technician and are interested in a stable career with a lot of opportunity for growth, join our team.

**Main Responsibilities:**

• Making sure vehicles are maintained and safe for our customers

• Doing preventive maintenance services on truck and trailer equipment with little or no supervision and in a timely manner

• Repairing and troubleshooting major components such as engines, transmissions and differentials, including replacing complete assemblies, turbochargers, fuel system components, etc.

• Keeping your work area clean and safe

• Using Penske’s tools and technologies to log, research and complete repairs, including basic vehicle diagnostics

• Learning new skills through Penske’s technician training

• Working on other projects and tasks as assigned by supervisor

**Why Penske is for You:**

• Competitive starting salary

• Shift Premium

• Career stability

• Opportunity for growth

• Excellent benefits, including lots of time off

• Strong, well-rounded training on a variety of OEM equipment (Penske’s Technician Certification Program is certified as a Continuing Automotive Service Education provider)

• Advanced vehicle maintenance technology

• Location and schedule flexibility

**Qualifications:**

• 6 years of practical experience with truck and tractor-trailer maintenance

• High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred

• Specialized training and experience in the diagnosis/troubleshooting of major components (engines, transmissions, differentials), OEM training courses, ASE Certification, and 608/609 certifications (preferred)

• Experienced using all tools of the trade (including welding equipment, diagnostic equipment, and hand and power tools)

• Valid driver’s license required, CDL preferred

• The ability to solve problems

• Excellent customer service skills and communication skills

• The ability to work well as part of a team

• Willing to work in non-climate-controlled conditions

• Basic computer skills

• The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management

• The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice.

• Regular, predictable, full attendance is an essential function of the job

• As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review.

• Willingness to travel as necessary within the district (customers’ yards, close geographical area and training sites), work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education) and pass a drug screening

This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others.

**Physical Requirements:** The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period.

• The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls.

• The associate must be able to work safely at heights using applicable ladders and elevated working platforms.

• The associate must be able to safely work in all weather conditions.

• Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment.

• The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg.

Penske is an Equal Opportunity Employer

**About Penske Truck Leasing/Transportation Solutions**

Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more.

Job Category: Vehicle Maintenance/Mechanics/Technicians

Job Function: Truck Maintenance

Job Family: Vehicle Maintenance

Address: 11 Tamarac Rd

Primary Location: US-PA-Wilkes Barre

Employer: Penske Truck Leasing Co., L.P.

Req ID: 2504392

POSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. The Maintenance Technician B may also perform basic tire work, such as replacement, tire rotation, and tread depth checks. Enjoy the benefits of working on a single fleet with state-of-the-art equipment, supporting our drivers as they run their routes and servicing some of the most technically advanced vehicles on the road.

+ Tackle a new challenge every day;

+ Maintain and repair highly intricate and powerful machinery;

+ Receive training on new technologies and equipment

+ Work a regular shift in a stable industry

+ Be recognized for exceptional performance

+ Serve your community and your customers

+ Follow strong career paths for professional growth

+ Enjoy competitive wages and benefits

+ Join us and help make a positive impact on your community, your environment and your world

PRINCIPAL RESPONSIBILITIES:

+ Maintains a working knowledge of, and moderate skill proficiency in, the following vehicle components and systems, with the ability to perform preventative and repair maintenance functions, both on-site and on the road.

+ Chassis component repair and maintenance.

+ Refuse bodies, including control, hydraulic and electrical systems; and air and hydraulic braking systems.

+ Engine repair and maintenance.

+ Suspension, drivetrain and steering systems.

+ Heating and air conditioning.

+ Performs line maintenance welding and fabrication.

+ Safely provides road service when necessary to ensure that the Company’s equipment is returned to operation in a safe and efficient manner.

+ Identifies the source of the malfunctions using a variety of electronic tools.

+ Completes applicable Company training programs.

+ Performs other job-related duties as assigned or apparent.

+ The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required by personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company..

QUALIFICATIONS:

+ Basic understanding of work order labor time standards.

+ Prior experience with, or knowledge of, maintenance work to be performed on Classes 1-5 light/medium duty and heavy-duty Class 7-8 trucks, aircraft, or ships.

+ Automotive Service Excellence (ASE) Certifications (T1-T8) are a plus but not required.

+ Commercial Driver’s License is a plus but not required.

+ Valid Driver’s License.

MINIMUM REQUIREMENTS:

+ Minimum of 1 year of experience in a technician position demonstrating knowledge of both gasoline and diesel powered equipment diagnosis and repair or will be graduating from an accredited automotive college or technical school within the next 3 months.

+ Ability to perform basic inspections with limited supervision in some (not all required) of the following heavy truck, or automotive systems: suspensions & steering; general engine, transmissions, brakes, electrical, hydraulics, drive train, diesel emissions.

**Rewarding Compensation and Benefits**

Eligible employees can elect to participate in:

• Comprehensive medical benefits coverage, dental plans and vision coverage.

• Health care and dependent care spending accounts.

• Short- and long-term disability.

• Life insurance and accidental death & dismemberment insurance.

• Employee and Family Assistance Program (EAP).

• Employee discount programs.

• Retirement plan with a generous company match.

• Employee Stock Purchase Plan (ESPP).

_The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company._

EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

**ABOUT THE COMPANY**

Republic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.

In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.

Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.

Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.

Our company values guide our daily actions:

+ **Safe** : We protect the livelihoods of our colleagues and communities.

+ **Committed to Serve** : We go above and beyond to exceed our customers’ expectations.

+ **Environmentally Responsible:** We take action to improve our environment.

+ **Driven** : We deliver results in the right way.

+ **Human-Centered:** We respect the dignity and unique potential of every person.

We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods.

**STRATEGY**

Republic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets.

We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.

With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.

**Recycling and Waste**

We continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.

**Environmental Solutions**

Our comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.

**SUSTAINABILITY INNOVATION**

Republic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.

The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.

We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.

**RECENT RECOGNITION**

+ Barron’s 100 Most Sustainable Companies

+ CDP Discloser

+ Dow Jones Sustainability Indices

+ Ethisphere’s World’s Most Ethical Companies

+ Fortune World’s Most Admired Companies

+ Great Place to Work

+ Sustainability Yearbook S&P Global